Tile and Grout Floor Cleaning & Sealing | Ceramic & Stone Glendale AZ

Tile and Grout Cleaning & Sealing Glendale AZ

How to Clean Grout Between Floor Tiles

Four Methods:Using Baking Soda and VinegarCleaning with Oxygenated BleachCleaning Grout with Hydrogen Peroxide, Baking Soda, and Dish SoapCleaning Grout with a Steam CleanerQuestions and Answers

Even after mopping, ceramic tile floors with dirty grout may still look messy. Give your floors a like new appearance by cleaning the grout as well. Depending on the type of tile and color of grout on your stone floor, there are different cleaning methods to renew your floor's clean look. Whether you choose chemical cleaners or more natural methods, you can get pristine grout with little effort.



Method 1
Using Baking Soda and Vinegar
  1. Image titled 1804529 1
    Make a paste of baking soda and water. Mix 3 parts of baking soda to 1 part water to make a thick paste. This versatile cleaner will work with all colors of grout, but vinegar can be harmful to some natural stone such as marble or limestone(travertine).
    • Apply the paste to the grout lines with your finger.
    • Although the baking soda isn’t harmful, wearing rubber gloves can help prevent scratches or irritated skin from the abrasive grout and baking soda.
  2. Image titled 1804529 2
    Make a 1:1 solution of white vinegar and water in a spray bottle. Spray the baking soda paste you applied with the vinegar solution. You should immediately see bubbling which lets you know the natural cleaning process has begun.
  3. Image titled 1804529 3
    Wait for the solution to stop bubbling. The bubbling action is a chemical reaction between the baking soda and vinegar. The reaction generally lasts a few minutes. After the bubbling has stopped the chemical cleaning action is done. Call us for a free no obligation floor evaluation and demo 602-214-9858.
  4. Image titled 1804529 4
    Scrub the grout lines with a brush. Use a nylon bristled scrub brush, or a toothbrush, to scrub along each grout line. Pay close attention to corners and edges to make these areas clean as well.[1]
  5. Image titled 1804529 5
    Mop the floor with plain water. Use a mop and plain water to remove the baking soda and vinegar residues. Rinse your mop and change the water often during the cleaning process so you do not continue to spread the residue around the floor. Make sure to repeat the grout sealing process every 3-5 years to prevent grout staining glendale az.
Fill Out Form
Contact Form